Model: LG2030
This model require Version 11 software.
with version 11 software mobile,
Dial 951753971753,
automatically Service Screen will open
Select Field Tests Option and a Debud Screen will open
Select Screen option for RF Perameters.
For other models:
DIAL:#LGCDMA#*RDXX30*
Note: XX represents Mobile Model No.
Model: All NOKIA Mobiles
Dial *3001#12345#
Nam Programming Window will open
Go to Last option and select - Field Test and press Enable
Now the mobile asks for a start up and a new menu will be available
with name NET MONITOR or a menu with NO NAME.
Select the blank Menu and press 3103 and OK.
Model: SAMSUNG N191
to be updated...

NOKIA CODES:

*#837# lets you check your PRL and software version.
*#639# will allow you to manually program your phone with the MIN and SID.
*#7780# Will restore factory settings
*#7370# Full factory reset. Resets all settings including non-user
>*#7370# - changeable items (like SPC). I'm afraid to do it.

*# 06 # - Seriennummer/IMEI
*# 0000 # - SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
*# 2820 # - Bluetooth (BT) device address indicate
xx # Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
Here is output of *#837#:
V F175V0300.nep
09-09-03
RH-17R (my N2280 with RUIM card support)
(c)NMP
Activated: 08/05/2004/
17:35:56
prl:00
ERI: None
PRI:514097i2
0514097
R-UIM version: 0

Alcatel
IMEI number: *#06#
Software version: *#06#
000000* ( six zero and star) - turns NetMonitor on


BOSCH GSM-COM 608 Network Monitor

You should use code: *#3262255*8378# (or *#DANCALL*TEST#). You will see menu no. 10 - Engineering, where you can see Monitor options. It turns off when you switch off the phone - you should use the code again to turn it on.
*#06# shows IMEI
*#0000# sets default language - English
Phone reset: #3370#

DANCALL
*#06#
IMEI
*#9999#
displays firmware version
*#9998#
displays version of configuration.
*#9997#
selftest-turns on all display segments and starts ringing.
*#9994#
serial number (only DANCALL HP 2731) Shows number of SIM card (not PIN number)
*#9993#
engineer menu When you enter this code then Engineering menu will appear. There are 2 submenus - Revisions where you can read information available after pressing *#9999# and *#9998# and Cell Info with information about network. Engineering menu will be switched off when you turn off the phone.
*#9990#
Battery monitor, battery test. Unfortunatelly meaning of the first line is unknown, battery power left in percents.M1599955 - counter of relative time left until battery discharged. (in 0.1 s), 31 - battery temperature (in degrees Centigrade) , 68 - battery voltage (in 0,1V), TIMER - charging/discharging time counter (in seconds)
*#9000#
Simlock causes that the phone ask for password when new card is inserted.
*#9001#
Group SIM Lock - this option is not well known and it probably requires special sim card. THis option probably gives you possibility to limit access only to preprogrammed numbers..
*#9002#
Operator SIM Lock - this option is not well known and it probably requires special sim card.
*#9003#
Network SIM Lock - the phone ask for password when other operator's card is inserted.
Ericsson
*#06# IMEI number
*#0000# or < 0 0 0 0 > Restore English menu version
> * < < * < * Version of software
< * * < Simlock info
Diode flash info:
- green with frequency about 1 Hz (1 per second) - phone is network area.
- 2 fast flashes of diode during standby mode means that the phone changes channel.
- green flashing with high frequency. Means that you have unread SMS message or a phone call.
- flashing red - weak battery.
- red diode on - battery charge
- green diode on - phone's battery is full and battery charger is connected.



Motorola
Activate net monitor: (pause means * holded until you see square)
[pause] [pause] [pause] 1 1 3 [pause] 1 [pause] [ok]
Deactivate:
[pause] [pause] [pause] 1 1 3 [pause] 0 [pause] [ok]
This option might not work with some versions of phones' software.
When you press OK you will have access to 3 additional menu options

1) Active cell

Displays active channel and allows to choose between
RxLev, RxLevAM, NCC, BCC, MSTxPwr i C1.
During a call you can see:
RxLev, RxLevFull, RxLevSub, RxQualFul, RxQualSub, Timeslot, TimeAdv, PwrLev
During a phone call you can see type of negotiation SDCCH
(Standalone Dedicated Control CHannel) takes place.
It can be: SDCCH8 or SDCCH4 .
2) Nearest cell:
You can view nearest cells (1 - 6) and their position.
3) System parameters
Displays : Combined, AcsClas, MCC, MNC, LAC, CellID, T3212, BS-PA-MFRM i XZQTY.
During a call you can see: Combined, DTX, MCC, MNC, LAC, CellID
Explanation of names showed on display
RxLev: Power of incomming signal (dB)
RxLevAm: Threshold value in dB, then it switches to other cell
BCC: Broadcast Color Code Allows to see base stations transmitting on the same frequency.
NCC: Network Color Code - National code of GSM operators GSM.
C1: Space in dB from upper level at which it switches to other cell
RxLevFull - Value of Cl parameter during continuous transmission.
RxLevSub - Value of Cl parameter during non-continuous transmission.
RxQualFull - Error bit rate measured for continuous transmission
RxQualSub - Error bit rate measured for non-continuous transmission
Timeslot - Time Slot Number. Number of frequency channel, description of time crack
TimeAdv - Distance from transmitter in km. Multiply factor of results is 0,547


PwrLev - Radiated power level
MCC: Mobile Country Code - 260 = Poland
MNC: Mobile Network Code - 01=PLUS GSM 02=ERA GSM, 03=IDEA appears after MCC.
CellID: Cell ID

Codes work with following software versions
TX770
5.3 / 2.3
6200
1.5 / 1.7
7500
5.3 / 2.1 , 6.0 / 2.1 , 6.3 / 2.3
8200
1.3 / 1.9 , 1.5 / 1.7 , 1.6 / 1.7 , 1.6 / 1.9 , 3.1 / 1.9

NOKIA 3110(GSM): *#06# - IMEI
*#3110#- Software version
##002#- - allows to turn off voice mail.
*#7780# - restore factory settings
*#746025625# (or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is a kind of standby mode which saces battery)
*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:
6232 (OK) - displays month and year of production date (ie "0198")
7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")
7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")
9268 (OK) - displays serial number
37832 (OK) - sets purchase date in format MMYY (MM - month, YY - year) -
attention: you can set it only once, so beware !!!
87267 (OK) - displays message "Confirm Transfer?" - meaning is unknown (?)
Nokia 1610/1630
*#170602112302# (software version)
1610/1611
- IMEI number: * # 0 6 #
Software version: * # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: * # 9 2 7 0 2 6 8 9 #
2110
*#9999# (software version)
2110i/2110e
*#170602112302# or (depends on model) *#682371158412125# (software version)

                  ...***...